The KM range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a 2000 hour or at most, annual service.

These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site.

Airforce V2000-VG150 lubricant is ideal for these units.

Also available are a range of Sparator Kits - KS Kits - and for major overhauls, the KT Kit range.

If you need a manual, please e-mail us with a serial number and the HV series number and we may be able to send an e-mail (pdf) manual free of charge on condition the parts you require are purchased from us.

We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.

The KS range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a 4000 hour or at most, bi-annual separator change.

These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site.

Airforce V2000-VG150 lubricant is ideal for these units.

Also available are a range of Service or Maintenance Kits - KM Kits - and for major overhauls, the KT Kit range.

If you need a manual, please e-mail us with a serial number and the HV series number and we may be able to send an e-mail (pdf) manual free of charge on condition the parts you require are purchased from us.

We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.

The KT range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a full strip and rebuild. KM and KS kits will also be required as will fresh oil.

These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site.

Airforce V2000-VG150 lubricant is ideal for these units.

Also available are a range of Service or Maintenance Kits - KM Kits - and for separator change, the KS kits.

If you need a manual, please e-mail us with a serial number and the HV series number and we may be able to send an e-mail (pdf) manual free of charge on condition the parts you require are purchased from us.

We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.

10W/40 Motor Oil Diesel Vehicles 5 litres

Multivis XHD FE 10W/40 Semi Synthetic
Health and Safety

10W/40 Motor Oil Diesel Vehicles

Box of 4 x 5 litre containers.

Multivis XHD FE 10W/40 Semi Synthetic
Health and Safety

10W/40 Motor Oil Petrol Vehicles

One 5 litre container.

10W/40 Motor Oil Petrol Vehicles

Box of 4 x 5 litre containers

Airforce Artic PG32 Anti icing Airline Tools Lubricant 5 litre containers
Technical Data

The La-Man AMD-035 Membrane Dryer comes complete with float drain, and 0.01 micron Filter Pre-Filtration System. Ideal for point of use very dry air - down to minus 20 degrees C Pressure Dew Point!

35 cfm flow at up to 150 psi (0.14 m3 / min @ 10 bar) 1/2" connections.

AMD Series SuperStar™ Membrane Dryer is the optimum choice for providing compressed air applications with Ultra-Clean & Dry compressed air.

See 050SKA for prefilter service kit and SAM350E for the fine filter service kit.

Element kit for LaMan SAM 350E Fine Prefilter.

Use with LaMan SUPERSTAR MEMBRANE DRYERS MD-15LS, MD-35LS, AMD-035