Home » All Products

 Checkout

JORC J9510 PURO Grand Oil Water Separator
JORC J9510 PURO Grand Oil Water Separator

Details 

The PURO is designed to separate oil from condensate that is extracted from compressed air systems. The PURO condensate separator covers all compressor capacities up to 1250 cfm or 35 m³/min which use mineral oil or blended synthetic oil as a lubricant.
List Price: £1,200.00
Price: £900.00

BAMBI VT75D
BAMBI VT75D

Details 

VTS Range - Oil Free Dry Air Dental Super Silent 54 db(A) Air Compressor, with 0.75Hp 120 l/min output on a 23 litre receiver.

Free Delivery UK Mainland. 12 month warranty.

Dental Air Compressor Range Specifications

List Price: £1,525.00
Price: £1,357.00

BAMBI VTS75D
BAMBI VTS75D

Details 

VTS Range - Oil Free Dry Air Dental Super Silent 54 db(A) Air Compressors with 0.75Hp 120 l/min on a 23 litres receiver.

Free Delivery UK Mainland. 12 month warranty.

Dental Air Compressor Range Specifications

List Price: £2,725.00
Price: £2,425.00

LaMan MD-80LS Membrane Dryer
LaMan MD-80LS Membrane Dryer

Details 

The La-Man MD-80LS Membrane Dryer comes complete with float drain, and 0.01 micron Filter Pre-Filtration System. Ideal for point of use very dry air - down to minus 40 degrees C Pressure Dew Point!

80 cfm flow at up to 150 psi (2.27 m3 / min @ 10 bar) 1" connections.

MD Series LaMan Membrane Dryers are ideal for local point of use very dry very clean compressed air - and are used in paint spraying, food processing, laboratory and any number of applications demanding clean dry compressed air.

See 150SKA for prefilter service kit and SAM550E for the fine filter service kit.
List Price: £6,790.00
Price: £3,772.00

Jorc J383 NUFORS Pneumatic No Air Loss Auto Drain
Jorc J383 NUFORS Pneumatic No Air Loss Auto Drain

Details 

The NUFORS removes condensate from compressed air systems with a system capacity of up to 50 m/3 or 750 cfm flow.

The operation is automatic and there is no unnecessary compressed air lost during the condensate discharge cycle.

The NUFORS uses pneumatic forces to operate the valve assembly and is ideally suited in applications where power is not available, too expensive or not reliable.

Fit after the compressor aftercooler, the dryer or the receiver and use in conjunction with a PURO or SEPREMIUM Condensate management unit.
List Price: £300.00
Price: £225.00

 
J9204 Replacement Carbon bag set for Owamat, BEKO,
 
J9204 Replacement Carbon bag kit for Condensate Oil Water Separator

Fits Owamat 5, Beko Owamat 5,

The use of OEM part numbers and model numbers where quoted are provided for reference purposes only. It is not intended to imply that Airware International Ltd parts are supplied to or by the original equipment manufacturer.
List Price: £162.00
Price: £90.00

 
J9261 Replacement Carbon bag kit for Hankison, Drukomat, Wartman, Zander
 
Fits Hankison HS-MK-2, HSMK-3, HSMK-4, HS180, HS300, HS900 (requires prefilter J9265),

Also fits Zander Ecosep S2 to S8, Zander S15 (requires prefilter J9265).

Also fits Wortmann Drukomat Drukomat 2 to 8, Drukomat 15 (requires prefilter J9265.

The use of OEM part numbers and model numbers where quoted are provided for reference purposes only. It is not intended to imply that Airware International Ltd parts are supplied to or by the original equipment manufacturer.
List Price: £70.00
Price: £56.00

Hydrovane HV02RM
Hydrovane HV02RM

Details 

Hydrovane HV02RM Free Air Delivered is 8 cfm at 10 bar output pressure. Stop / Start control with a 1.1 kW IP55 motor (1 phase on a 20 amp supply or 3 phase options) and a low noise level of only 69 dB(A) mounted on a 75 litre receiver. There is also an air aftercooler kit available to take out 60% of the condensate in the air and a membrane dryer kit to make the air totally dry and oil free and without the problem of having to remove the condensate!

Special reduced net prices have been applied. 12 month UK wide warranty.

Base unit List Price £1947.00 - our price only £1460.00 with Free UK Mainland Delivery!

Key Facts Brochure


Aftercooler & Dryer Kit:
Phase:
Price: £1,460.00

Hydrovane HV04RM
Hydrovane HV04RM

Details 

Hydrovane HV04RM Free Air Delivered is 20 cfm at 10 bar output pressure. Stop / Start control with a 4 kW motor 3 phase motor and a low noise level of only 73 dB(A) mounted on a 200 litre receiver. There is also an air aftercooler kit available to take out 60% of the condensate in the air and a membrane dryer kit to make the air totally dry and oil free and without the problem of having to remove the condensate!.

Special reduced net prices have been applied. 12 month uk wide full warranty.

Base unit List Price £3329.00 - our price only £2460.00 with Free UK Mainland Delivery!

Key Facts Brochure

Aftercooler & Dryer Kit:
Price: £2,460.00

BEA Technologies ARS180RA
BEA Technologies ARS180RA

Details 

Fine 0.01 micron element for oil removal. Replacement Element for filter CDF 180
Price: £92.50

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | Next »

Buy online with confidence...

Supplier of Quality Parts and Equipment to Industry

Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
> Checkout


Select A Different Category...
Telephone No: (+44) 1527 870 110
Copyright © 2010 - All rights reserved
Conditions of Sale