If you can't find what you need please call

01527 870110

or email

sales@awi.co.uk

VIEW CART

If you can't find what you need please call

01527 870110

or email

sales@awi.co.uk

The Hydrovane series rotary vane compressors are versatile, powerful, reliable and cost effective. They can be found in trains, ships, engineering, distilling, brewing, packaging sites and in large and small industrial units through the world. In fact they are the perfect business solution to your requirement for reliable, high quality compressed air. The low noise level of the Hydrovane air compressors means that they can be installed right alongside your equipment. The HV01 Tripod, HV02 Tripod, HV01RM (receiver Mounted), HV02RM, HV04RM, HV05RM and HV07RM range. These units are all very durable and capable of 27/7 operation. There are numerous examples operating 10 or more years into a still active life without a major overhaul! A trully remarkable product. Hypac Range A fully integrated range of compressor packages with outputs from 0.12 or 24 cfm FAD to 3.60m3/min or 127 cfm and operating pressure from 7 to 13 bar, depending on the model. Many Hydrovanes now come with a Variable Speed option, so benefiting from some of the various financial incentives available through The Carbon Trust.

Hydrovane Electronic Control HV30 - with Variable Speed Drive Option

Hydrovane Electronic Control HV30 - now with Variable Speed Drive Option to precisely match compressor speed to compressor output. The direct drive at low rpm ensures a reliable pulse free supply of good quality quietly produced compressed air. And the savings if the unit is correctly operated and used can be as much as 25% against a modern fixed speed unit. Even a unit as good as a fixed speed Hydrovane!

This unit has a low noise level of only 71 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air. For output data see details.

12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Pressure Options
Variable Speed Option

Hydrovane Electronic Control HV37 - with Variable Speed Drive Option

Hydrovane Electronic Control HV37 - now with Variable Speed Drive Option to precisely match compressor speed to compressor output. The direct drive at low rpm ensures a reliable pulse free supply of good quality quietly produced compressed air. And the savings if the unit is correctly operated and used can be as much as 25% against a modern fixed speed unit. Even a unit as good as a fixed speed Hydrovane!

This unit has a low noise level of only 73 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air. For output data see details.

12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Pressure Options
Variable Speed Drive

Hydrovane Electronic Control HV45 - with Variable Speed Drive Option

Hydrovane Electronic Control HV45 - now with Variable Speed Drive Option to precisely match compressor speed to compressor output. The direct drive at low rpm ensures a reliable pulse free supply of good quality quietly produced compressed air. And the savings if the unit is correctly operated and used can be as much as 25% against a modern fixed speed unit. Even a unit as good as a fixed speed Hydrovane!

This unit has a low noise level of only 73 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air. For output data see details.

12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Pressure Options
Variable Speed Drive Option

Hydrovane HR05E

Hydrovane HR05E replaces Hydrovane HV05 Hypac range. Free Air Delivered is 32 cfm at 7 bar or 25 cfm at 10 bar output pressure. Stop / Start control with a DOL start 5.5 kW 3 phase motor and a low noise level of only 66 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air and a dryer and filter option and a dryer and filter and 250 litre receiver option. In this configeration the discharge air is effectivly dry oil free air.

Free delivery UK mainland. 12 month warranty extendable to 10 years as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is now fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure


Features
Pressure Options

Hydrovane HR07E

Hydrovane HR07E replaces HV07 Hypac range. Now with the option of REGULATED SPEED DRIVE and the benefit of zero interest loans (qualifying companies only - see www.carbontrust.co.uk)

Free Air Delivered is 44 cfm at 7 bar or 35 cfm at 10 bar output pressure. Stop / Start control with Star Delta Starter and a 7.5 kW 3 phase motor. This unit has a low noise level of only 67 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air and a dryer and filter option and a dryer and filter and 250 litre receiver option. In this configuration the discharge air is effectivly dry oil free air.

Free delivery UK mainland. 12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is now fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Regulated Speed Option
Features
Pressure Options

Hydrovane HV01 - Tripod

Hydrovane HV01 Tripod. Free Air Delivered is 4 cfm at 10 bar output pressure. DOL Start 1.1 kW IP55 motor (1 phase or 3 phase options) and a low noise level of only 62 dB(A) There is also an air aftercooler kit available to take out 60% of the condensate in the air. The dryer option for the HV01 - Tripod is a free standing refrigerant dryer complete with oil removal filter.

12 month UK wide full warranty.

Hydrovane Brochure


Phase
Options

Hydrovane HV01RM

Hydrovane HV01RM

Phase
Options

Hydrovane HV02 - Tripod

Hydrovane HV02 Tripod. Free Air Delivered is 8 cfm at 10 bar output pressure. DOL Start 2.2 kW IP55 motor (1 phase on a 20 amp supply or 3 phase options) and a low noise level of only 62 dB(A) There is also an air aftercooler kit available to take out 60% of the condensate in the air . The dryer option for the HV02 - Tripod is a free standing refrigerant dryer complete with oil removal filter.

12 month UK wide full warranty.

Hydrovane Brochure


Phase
Options

Hydrovane HV02RM

Hydrovane HV02RM Free Air Delivered is 8 cfm at 10 bar output pressure. Stop / Start control with a 1.1 kW IP55 motor (1 phase on a 20 amp supply or 3 phase options) and a low noise level of only 69 dB(A) mounted on a 75 litre receiver. There is also an air aftercooler kit available to take out 60% of the condensate in the air and a membrane dryer kit to make the air totally dry and oil free and without the problem of having to remove the condensate!

12 month UK wide warranty. 

Hydrovane Brochure


Phase
Options

Hydrovane HV04RM

Hydrovane HV04RM Free Air Delivered is 20 cfm at 10 bar output pressure. Stop / Start control with a 4 kW motor 3 phase motor and a low noise level of only 73 dB(A) mounted on a 200 litre receiver. There is also an air aftercooler kit available to take out 60% of the condensate in the air and a membrane dryer kit to make the air totally dry and oil free and without the problem of having to remove the condensate!.

12 month uk wide full warranty.

Hydrovane Brochure


Options

Hydrovane HV05RM

Hydrovane HR05 PR-07 replaces HV05RM Free Air Delivered is 25 cfm at 10 bar output pressure. Stop / Start control with a DOL start 5.5 kW 3 phase motor and a low noise level of only 73 dB(A) mounted on a 200 litre receiver. To dry or filter the output air see the appropriate refigerant dryer and in line filters.

12 month UK wide full warranty.

Hydrovane Brochure


Hydrovane HV07RM

Hydrovane HR07 PR-07 replaces HV07RM Free Air Delivered is 35 cfm at 10 bar output pressure. Stop / Start control with a Star Delta start 7.5 kW 3 phase motor and a low noise level of only 73 dB(A) mounted on a 200 litre receiver. To dry or filter the output air see the appropriate refigerant dryer and in line filters.

12 month UK wide full warranty.



Hydrovane Brochure

Hydrovane HV11 - HYPAC with Regulated Speed Drive Option

Free Air Delivered is 61 cfm at 8 bar or 52 cfm at 10 bar output pressure. Stop / Start control with Star Delta Starter and a 11 kW 3 phase motor. This unit has a low noise level of only 69 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air and a dryer and filter option and a dryer and filter and 272 litre receiver option. In this configeration the discharge air is effectivly dry oil free air.

Free delivery UK mainland. 12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is now fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Variable Speed Option
Features
Pressure Options

Hydrovane HV15 - HYPAC with Variable Speed Drive Option

Free Air Delivered is 81 cfm at 8 bar or 71 cfm at 10 bar output pressure. Stop / Start control with Star Delta Starter and a 15 kW 3 phase motor. This unit has a low noise level of only 70 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air and a dryer and filter option and a dryer and filter and 272 litre receiver option. In this configeration the discharge air is effectivly dry oil free air.

Free delivery UK mainland. 12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is now fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Variable Speed Option
Features
Pressure Options

Hydrovane HV18 - HYPAC with Variable Speed Drive Option

Free Air Delivered is 104 cfm at 8 bar or 90 cfm at 10 bar output pressure. Stop / Start control with Star Delta Starter and a 18 kW 3 phase motor. This unit has a low noise level of only 70 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air and a dryer and filter option and a dryer and filter and 272 litre receiver option. In this configeration the discharge air is effectivly dry oil free air.

Free delivery UK mainland. 12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is fitted with REVS (Reduced Energy Venting System) as standard.

Hydrovane Brochure
Hydrovane RS Brochure


Variable Speed Option
Features
Pressure Options

Hydrovane HV22 - HYPAC with Variable Speed Drive Option

Free Air Delivered is 127 cfm at 8 bar or 110 cfm at 10 bar output pressure. Stop / Start control with Star Delta Starter and a 22 kW 3 phase motor. This unit has a low noise level of only 71 dB(A). There is also an air aftercooler fitted as standard which will take out 60% of the condensate in the air and a dryer and filter option and a dryer and filter and 272 litre receiver option. In this configeration the discharge air is effectivly dry oil free air.

Free delivery UK mainland. 12 month warranty extendable to 10 years (5 years on the Variable Speed Inverter) as long as the unit is sited operated and maintained correctly by a Hydrovane approved distributor. Like us!

This unit is now fitted with REVS (Reduced Energy Venting System) as standard. 

Hydrovane Brochure
Hydrovane RS Brochure


Variable Speed Option
Features
Pressure Options

The KM range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a 2000 hour or at most, annual service. These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site. Airforce V2000-VG150 lubricant is ideal for these units. Also available are a range of Sparator Kits - KS Kits - and for major overhauls, the KT Kit range.  We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.

KM031 Service Kit for Hydrovane 13 or 23 or 33 AWI bin location 73101

KM031 Service Kit is suitable for Hydrovane models starting with 13 or 23 or 33 ie 13PU or 13PUM or 13PUAS.
This service kit does NOT contain a separator element.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS031 Separator Kit as well.

Also available is a KT031 Full Overhaul Kit containing all the shims and gaskets as well as an oil seal.

Oil

KM032 Service Kit for Hydrovane 43 or 48 AWI bin location 73102

KM032 Service Kit is suitable for Hydrovane models starting with 43 or 48 ie 43PU or 43PUM or 43PUAS or 48AC or 48SQ. This service kit does NOT contain a Separator element.

One can of 5 litre Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS032 Separator Kit as well.

Also available is a KT032 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM066 Service Kit for Hydrovane 45 or 66 or 90D Portable AWI bin location 73105

KM066 Service Kit is suitable for Hydrovane models starting with 45 or 66 ie 45PU or 66PUM or 66PUAS. Also suitable for the air end in Hydrovane portable compressor 90D or 90DSS or 90DSSG. This service kit does NOT contain a separator element.

One can of 5 litre Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS66F felt separator kit (serial number including prefix 16HV) or KS66E ceramic separator kit (serial number from 17HV) as well.

Also available is a KT66 Full Overhaul Kit containing all the shims and gaskets as well as an oil seal.

Oil

KM120 Service Kit for Hydrovane 120 or 140 or 100DS or 125 DS or 152DS or HV7 Portables AWI bin location 73116

KM120 Service Kit is suitable for Hydrovane models starting with 120 or 140 or 139 ie 120PU or 120PUM or 120PUAS. Also suitable for the air end in Hydrovane portable compressor 100DS or 152DS or HV7F or HV7FG or 125DS or 125DSG or 152DS or 152DSG. This service kit does NOT contain a separator element.

3 cans of 5 litres of Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS120F felt separator kit (serial number including prefix 16HV) or KS120E ceramic separator kit (serial number from 17HV) as well.

Also available is a KT120 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM170 Service Kit for Hydrovane 170 AWI bin location 73117

KM170 Service Kit is suitable for Hydrovane models starting with 170. This service kit does NOT contain a separator element.

3 cans of 5 litres of Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS170F felt separator kit (serial number including prefix 6HV) or KS170E ceramic separator kit (serial number from 7HV) as well.

Also available is a KT170 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM250 Service Kit for Hydrovane 250 AWI bin location 73118

KM250 Service Kit is suitable for Hydrovane models starting with 250. This service kit does NOT contain a separator element.

3 cans of 5 litre Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS250F felt separator kit (serial number including prefix 6HV) or KS250E ceramic separator kit (serial number from 7HV) as well.

Also available is a KT250 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM350 Service kKit for Hydrovane 350 AWI bin location 73119

KM350 Service Kit is suitable for Hydrovane models starting with 350. This service kit does NOT contain a separator element.

3 cans of 5 litres of Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS350 separator kit.

Also available is a KT350 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM51 Service Kit for Hydrovane 5 or 15 or 501 or 502 or V1 or V2 AWI bin location 73103

KM51 Service Kit is suitable for Hydrovane models starting with 05 or 15 or 501 or 502 or V01 or V02. This full service kit includes a separator element.

One can of 5 litres of Airforce V2000-150-005 will be required.

Also available is an Overhaul Kit containing all the internal shims and gaskets for models 5 and 15 - KT51 - or for models 501 or V01 and 502 or V02 - KT52.

Oil

KM52 Service Kit for Hydrovane 25 or 504 or HV04RM or HV05RM or HV07RM AWI bin location 73104

KM52 Service Kit is suitable for Hydrovane models starting with 25 or 504 as well as HV04 RM HV05 RM HV07 RM. This full service kit includes a separator element.

One can of 5 litre Airforce V2000-150-005 will be required.

Also available is Overhaul Kit KT53 containing all the internal shims and gaskets for models 25 and 504 HV04 RM and HV05 RM and HV07 RM.

Oil

KM71 Service Kit for Hydrovane 37 or 47 or 705 or 707 or V05 or V07 AWI bin location 73106

KM71 Service Kit is suitable for Hydrovane models starting with 37 or 47 ie 37PU or 47PUAS or 705 or 707 or V05 or V07. This service kit does NOT contain a separator element.

One can of 5 litre Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS71 Separator Kit as well.

Also available is a KT71 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM72 Service Kit for Hydrovane 68 or 88 AWI bin location 73107

KM72 Service Kit is suitable for Hydrovane models starting with 68 or 88 ie 68PU or 88 PUAS. Serial numbers up to and including 1HV. This service kit does NOT contain a separator element.

Two cans of 5 litre Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS72 Separator Kit as well.

Also available is a KT72 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KM73 Service Kit for Hydrovane 67 or 87 or 68 or 88 or 711 or 715 or V11 or V15 AWI bin location 73108

KM73 Service Kit is suitable for Hydrovane models starting with 67 or 87 or 68 or 88 (but for models 68 and 88 from serial number prefix 2HV upwards) or 711 or 715 or V11 or V15. This service kit does NOT contain a separator element.

Two cans of 5 litre Airforce V2000-150-005 will be required.

If the separator needs attention then you will need a KS72 Separator Kit as well.

Also available is a KT72 or KT73 or KT74 depending on model and serial number. Full Overhaul Kit containing all internal shims and gaskets as well as an oil seal.

Oil

KM81 Service Kit for Hydrovane 128 or 148 AWI bin location 73109

Hydrovane maintenance kit contains all the parts for a standard service. This service kit does NOT contain a separator element.

KM81 is suitable for all Hydrovane models 128 up to and including serial number starting 6HV.

All models are 148 up to and including serial number 4HV.

A KS81 Separator Kit and KT81 Full Overhaul Kit may be required depending on the service due.

Three cans of 5 litre Airforce V2000-150-005 will be required.

Oil

KM82 Service Kit for Hydrovane 128 or 148 or 818 or 822 or V18 or V22 AWI bin location 73110

Hydrovane maintenance kit contains all the parts for a standard service. This service kit does NOT contain a separator element.

KM82 is suitable for all Hydrovane models 128 with a serial number starting with 7HV and up (Mark 2 models).

All Hydrovane models 148 with serial numbers 5HV and up.

All Hydrovane models 818 and 822.

All Hydrovane models V18 and V22 (but add radiator pre filter 74184)

A separator kit (KS81 or KS82) and/or a Full Overhaul Kit (KT81 or KT82) may also be required depending on the service required and model serial number.

3 Cans of 5 litres Airforce V2000-150-005 is required.

Oil

KM83 Service Kit for Hydrovane 178 AWI bin location 73111

Hydrovane Maintenance kit contains all the parts for a standard service.

KM83 suitable for All Models 178 with serial number up to and including 3HV

A Separator Kit KS83 and a Full Overhaul kit KT83 may also be required depending on service required and serial number.

3 cans of 5 litres of lubricant Airforce V2000-150-005 will be required.

Oil

KM84 Service Kit for Hydrovane 178 or 218 or 258 or 830 or 388 AWI bin location 73112

Hydrovane Maintenance kit contains all the parts for a standard service.

Three cans of 5 litres of Airforce V2000-150-005 will be required 6 cans for model 388.

KM84 suitable for All Models 178 prefix from HV4 Models 218 and 258 with serial numbers starting HV and 1HV Model 830 serial number 900001 to 900177. 2 kits are required for model 388.

A Separator Kit (KS83 or KS84) and /or a Full Overhaul kit (KT83 or KT84) may also be required depending on service required and model serial number.

Oil

KM85 Service Kit for Hydrovane 218 or 258 or V30 or 837 or V37 AWI bin location 73113

Hydrovane Maintenance kit contains all the parts for a standard service.

Three cans of 5 litres of Airforce V2000-150-005 will be required.

KM85 suitable for Model 218PUAS and Model 258PUAS serial number starting 2HV or 830 or V30E from serial number 90017 or 837 or V37 or V37E from serial number 900128

All Models 830PUAS and V30 with serial numbers starting 001468 Models 830AIRLOGIC and V30E with serial numbers starting 900178

All Models 837 and V37and Models 837 AIRLOGIC and V37E serial numbers 900001 to 900127

A Separator Kit KS84 and /or a Full Overhaul kit (KT84 or KT87) may also be required depending on service required and model serial number.

Oil

KM86 Service Kit for Hydrovane 258 or 837 or V37 or 845 or V45 AWI bin location 73114

Hydrovane Maintenance kit contains all the parts for a standard service.

KM86 suitable for All Models 258 08-300 Models 837AIRLOGIC and V37E serial number 90128 onwards 845PUAS serial number 000001 to 000354 and Model 845AIRLOGIC serial number 900001 to 900047. Also Model 845 PUAS and V45 to 000355 and 845AIRLOGIC and V45E to serial number 900048.

A Separator Kit (KS84 or KS85) and /or a Full Overhaul kit (KT84 or KT87) may also be required depending on service required and model serial number.

3 cans of 5 litres of lubricant Airforce V2000-150-005 are required.

Oil

KM91 Service Kit for Hydrovane 955 or 975 AWI bin location 73115

Hydrovane Maintenance kit contains all the parts for a standard service.

KM91 suitable for All Models 955PUAS Mk1 or 955AIRLOGIC Mk1 and 975PUAS Mk1 or 975AIRLOGIC Mk1

A Separator Kit KS91 and a Full Overhaul kit KT91 may also be required depending on service required.

4 cans of 5 litres of lubricant Airforce V2000-150-005 are required.

Oil

KM92 Service Kit for Hydrovane 955 or 975 or V55 or V75

Hydrovane Maintenance kit contains all the parts for a standard service.

KM92 suitable for All Models 955 ELECTRONIC Mk2 or V55 ELECTRONIC Mk2 or 975 ELECTRONIC Mk2 or V75 ELECTRONIC Mk2 or 975ACP SYNERGY 75 / RS

A Separator Kit KS91 or KS92 and /or a Full Overhaul kit KT91 may also be required depending on service required and model serial number.

4 cans of 5 litres of lubricant Airforce V2000-150-005 are required.

Oil

These kits are genuine Hydrovane kits, supplied by the OEM, with the oil supplied by Morris Lubricants. This is a list of the more common kits - if the kit you requre is not shown, please contact us. If you require other parts for your Hydrovane compressor, please e-mail us on sales@awi.co.uk. KO kits are oil change kits usually required every 2000 operating hours or annually, KM kits after 1995 are full service kits with separators and MPV valve seats and seals, KSV kits are solenoid kits and KT kits are additional parts for a strip and re-assemble. but a KM kit is normally required if this major work is being undertaken.

KM1122E - Hydrovane 4000 Hour Service Kit with separtors V11 - V22

4000 Hour Service Kit with separators and MPV valve seats and seals for Hydrovane Model HV11 ACE s/n V1-000301 and below add panel filter 76016 HV15 ACE or RS s/n V15-000352 and below add panel filter 76016

HV11 ACE s/n V11-000302 and above HV15 ACE or RS s/n HV15-000353 HV18 ACE and HV22ACE and RS add panel filter 77038.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

HV11 require about 5 litres of oil.
HV15 HV18 and HV22 requires about 10 litres of oil.

Oil
Panel Filter

KM3045E - Hydrovane 4000 Hour Service Kit with separators

4000 Hour Service Kit for Hydrovane Model Mark 1 HV30 HV37 HV45 HV30-RS HV37-RS and HV45-RS.

2000 Hour Service Kit for Hydrovane Model HV45 and HV45-RS.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

HV30 HV37 and HV45 require about 25 litres of oil and 2 off panel filters 77134.

Oil
Panel Filter

KM457 - Hydrovane 4000 Hour Service Kit with separators for HV04 HV05 HV07

4000 Hour Service Kit with separators and MPV valve seats and seals for Hydrovane Mark 1 Vertical Concept Model HV04 HV05 HV07 and HV07-RS.

These units have a plastic or fiberglass cabinet.

HV04 and HV05 require about 3.5 litres of oil.
HV07 requires about 5 litres of oil.

Oil
Panel Filters

KM457E - Hydrovane 4000 Hour Service Kit with separator

4000 Hour Service Kit with separators and MPV valve seats and seals for Hydrovane Mark 2 Vertical Concept Model HV04 HV05 HV07 and HV07-RS.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

HV04 and HV05 requires about 3.5 litres of oil.
HV07 requires about 5 litres of oil.

Oil
Panel Filters

KO1122E - Hydrovane 2000 Hour Oil Change Service Kit HV11 - HV22

2000 Hour Oil Change Service Kit (without separators and MPV valve seats and seals) for Hydrovane Model HV11 ACE s/n V1-000301 and below and HV15 ACE or RS s/n V15-000352 and below add panel filter 76016

HV11 ACE s/n V11-000302 and above HV15 ACE or RS s/n HV15-000353 and above or HV18 ACE and HV22ACE and RS add panel filter 77038.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

HV11 requires about 5 litres of oil.
HV15 HV18 and HV22 requires about 10 litres of oil.

Oil
Panel Filter

KO3045E - Hydrovane 2000 Hour Oil Change Service Kit Mark 1 HV30 - HV45

2000 Hour Oil Change Service Kit (without separators and MPV valve seats and seals) for Hydrovane Model HV30 HV37 HV45 HV30-RS HV37-RS HV45RS

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

You will require about 25 litres of oil.

Oil
Panel Filter

KO457 - Hydrovane 2000 Hour Oil Change Service Kit Mark 1 HV04 - HV05 - HV07

2000 Hour Oil Change Service Kit (without separators and MPV valve seats and seals) for Hydrovane Mark 1 Model HV04 HV05 HV07 and HV07-RS.

These units have a plastic or fiberglass cabinet.

You will require about 5 litres of oil.

Oil
Panel Filters

KO457E - Hydrovane 2000 Hour Oil Change Service Kit Mark 2 HV04 HV05 HV07

2000 Hour Oil Change Service Kit (without separators and MPV valve seats and seals) for Hydrovane Mark 2 Model HV04 HV05 HV07 and HV07-RS.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

You will require about 5 litres of oil

Oil
Panel Filters

KT1115E - Hydrovane workshop rebuild kit for Mark 1 HV11 HV15

Top Up Kit for Hydrovane Mark 1 HV11 HV15 Vertical Concept units. These kits are for a major strip and rebuild. A KM457 will also be required as will fresh oil.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

KT1122E - Hydrovane workshop rebuild kit for Mark 2 HV11 HV15 and Mark 1 HV18 HV22

Top Up Kit for Hydrovane Mark 2 HV11 HV15 Vertical Concept units. These kits are for a major strip and rebuild. A KM457 will also be required as will fresh oil.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

KT3045E - Hydrovane workshop rebuild kit for HV30 HV37 HV45

Top Up Kit for Hydrovane Mark 1 HV30 HV37 HV45 units. These kits are for a major strip and rebuild. A KM3045E will also be required as will fresh oil.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

KT3045ELS - Hydrovane workshop rebuild kit for HV30 HV37 HV45 with larger separators.

Top Up Kit for Hydrovane HV30 HV37 HV45 units. These kits are for a major strip and rebuild. A KM3045ELS will also be required as will fresh oil.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

KT457 - Hydrovane workshop rebuild kit for HV04 HV05 HV07 Mark 1

Top Up Kit for Vertical Concept for Hydrovane HV04 HV05 HV07 Mark 1 units.

These kits are for a major strip and rebuild. A KM457 will also be required as will fresh oil.

These units have a plastic or fiberglass cabinet.

KT457E - Hydrovane workshop rebuild kit for HV04 HV05 HV07 Mark 2

Top Up Kit for Vertical Concept for Hydrovane HV04 HV05 HV07 Mark 2 units. These kits are for a major strip and rebuild. A KM457E will also be required as will fresh oil.

These compressors will have a hinged starter door electronic control and all metal cabinets. They do NOT have fiberglass or plastic cabinets.

The KS range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a 4000 hour or at most, bi-annual separator change. These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site. Airforce V2000-VG150 lubricant is ideal for these units. Also available are a range of Service or Maintenance Kits - KM Kits - and for major overhauls, the KT Kit range. We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.

KS031 Separator Kit for Hydrovane 13 or 23 or 33

KS031 Separator Service Kit is suitable for Hydrovane models starting with 13 or 23 or 33 ie 23PU or 23PUM or 23 PUAS.

This Separator service kit does NOT contain routine service parts.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM031 maintenance kit is required as well.

Also available is a KT031 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS032 Separator Kit for Hydrovane 43 or 48

KS032 Separator Service Kit is suitable for Hydrovane models starting with 43 or 48 ie 43PU or 43PUM or 43 PUAS or 48AC or 48SQ.

This Separator service kit does NOT contain routine service parts.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM032 maintenance kit is required as well.

Also available is a KT032 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS066E Separator Kit for Hydrovane 66 or 90D Series Portables

KS066E Separator Service Kit is suitable for Hydrovane models starting with 66 from Serial Number 17HV up. Also used on 90D or DS or DSS or DSG Portables with separator elements fitted again the air end serial number will be 17HV up.

This Separator service kit does NOT contain routine service parts.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM066 maintenance kit is required as well.

Also available is a KT066 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS066F Separator Kit for Hydrovane 45 or 66 or 90D Series Portables

KS066F Separator Service Kit is suitable for Hydrovane models starting with 66 from Serial Number up to and including 16HV. Also used on 90D Portables with Felt separator elements fitted again the air end serial number will be up to 16 HV

This Separator service kit does NOT contain routine service parts.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM066 maintenance kit is required as well.

Also available is a KT066 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS120E Separator Kit for Hydrovane 120 or 140 or 1110 and 152 Portables

KS066F Separator Service Kit is suitable for Hydrovane models starting with 66 from Serial Number up to and including 16HV. Also used on 90D Portables with Felt separator elements fitted again the air end serial number will be up to 16 HV

This Separator service kit does NOT contain routine service parts.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM066 maintenance kit is required as well.

Also available is a KT066 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS120F Separator Kit for Hydrovane 120 or 139 or 140 or 110 and 152 Portables

KS120F Separator Service Kit is suitable for Hydrovane models starting with 120 or 139 or 140 with a serial number of 20HV or lower and with felt type separators.

This Separator service kit does NOT contain routine service parts.

Three cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM120 maintenance kit is required as well.

Also available is a KT120. This full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS170E Separator Kit for Hydrovane 170

KS170E Separator Service Kit is suitable for Hydrovane models starting with 170 serial number from 7HV up and with separator elements.

This Separator service kit does NOT contain routine service parts.

Three cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM170 maintenance kit is required as well.

Also available is a KT170. This full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS250E Separator Kit for Hydrovane 250

KS250E Separator Service Kit is suitable for Hydrovane models starting with 250 serial number from 7HV up and with separator elements.

This Separator service kit does NOT contain routine service parts.

Four cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM250 maintenance kit is required as well.

Also available is a KT250. This full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS350 Separator Kit for Hydrovane 350

KS350 Separator Service Kit is suitable for Hydrovane models starting with 350.

This Separator service kit does NOT contain routine service parts.

Four cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM350 maintenance kit is required as well.

Also available is a KT350. This full Overhaul Kit contains all the internal shims

Oil

KS71 Separator Kit for Hydrovane 37 or 47 or 705 or 707 or V05 or V07

KS71 Separator Service Kit is suitable for Hydrovane models starting with 37 or 47 or 705 or 707 or V05 or V07 ie 37PU or 37PUM or 37 PUAS

This Separator service kit does NOT contain routine service parts.

One can of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM71 maintenance kit is required as well.

Also available is a KT71 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS72 Separator Kit for Hydrovane 67 or 68 or 87 or 88 or 711 or 715

KS72 Separator Service Kit is suitable for Hydrovane models starting with 67 or 68 or 87 or 88 or 711 or 715 ie 68PU or 88 PUAS

This Separator service kit does NOT contain routine service parts.

Two cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM72 maintenance kit is required as well for models with serial number to 1HV and KM73 for models with serial number 2HV and for all models 711 and 715.

Also available is a KT72 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS81 Separator Kit for Hydrovane 128 or 148

KS81 Separator Service Kit is suitable for Hydrovane models starting with 128 with serial number starting up to 8HV and 148 with serial number starting up to 6HV

This Separator service kit does NOT contain routine service parts.

Two cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM81 maintenance kit is required as well.

Also available is a KT81 Full Overhaul Kit containing all the internal shims and gaskets as well as an oil seal.

Oil

KS82 Separator Kit for Hydrovane 128 or 148 or 818 or 822

KS82 Separator Service Kit is suitable for Hydrovane models starting with 128 with serial number from 9HV and 148 with serial number from 7HV or 818 and 822 PUAS or 818 and 822 AirLogic or V18 and V22 PSAS or PEAS

This Separator service kit does NOT contain routine service parts.

Two cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM82 (with part 74184 panel filter added for V18 and V22) maintenance kit is required as well.

Also available is a KT82 for all 818 and 822 AirLogic Mark 1 and KT86 for all others in this group. This full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal required for a full overhaul.

Oil

KS83 Separator Kit for Hydrovane 178 or 218 or 258

KS83 Separator Service Kit is suitable for Hydrovane models starting with 178 with serial number starting up to 6HV or 218 and 258 models with serial number starting up to HV

This Separator service kit does NOT contain routine service parts.

three cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM83 to 3HV and KM84 from 3HV or for 218 and 258 KM84 to 1HV and KM85 for 2HV models maintenance kit is required as well.

Also available is a KT84 to 4HV and for all 218 and 258 models is required. The full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS84 Separator Kit for Hydrovane 178 or 218 or 258 or 830 or V30

KS84 Separator Service Kit is suitable for Hydrovane models 178 with serial number from 7HV or 218 and 258 models with serial number from 1HV or models 830 PUAS or V30 Puas or 830 AirLogic or V30E AirLogic Mk2

This Separator service kit does NOT contain routine service parts.

Three cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM84 or for 218 and 258 KM84 to 1HV and KM85 for 2HV models maintenance kit is required as well. For Model 830 from s/n 001468 use KM85 and for models 830 or V30E Airlogic Mk2 s/n from 900078 use KM85

Also available is a KT84 Overhaul Kit. For models 830 AirLogic Mk 1 s/n 900001 to 900073 use KT84 and for 830PUAS and V30 and 830 and V30E AirLogic Mk 2 use KT87. The full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS85 Separator Kit for Hydrovane 845 or V45

KS85 Separator Service Kit is suitable for Hydrovane models starting with 845 or V45 or V45E AirLogic.

This Separator service kit does NOT contain routine service parts.

Three cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM86 maintenance kit is required as well.

Also available is a KT84 to 845PUAS s/n to 000354 and 845 AirLogic to s/n 900047 and KT87 for 845 s/n 000355 up and 845 AirLogic from s/n 9000048 up. The full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS91 separator Kit for Hydrovane 9555 or 975

KS91 Separator Service Kit is suitable for Hydrovane models starting with 955 Mk 1 and 975 Mk 1 UAS or AirLogic.

This Separator service kit does NOT contain routine service parts.

3hree cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM91 maintenance kit is required as well.

Also available is a KT91. This full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

KS92 Separator Kit for Hydrovane 955 or 975 or V55 or V75

KS92 Separator Service Kit is suitable for Hydrovane models starting with 955 and 975 and V55 or V75 Electronic or 975 ACP

This Separator service kit does NOT contain routine service parts.

Three cans of 5 litres of Airforce V2000-150-005 will be required.

If the compressor requires routine service then a KM92 maintenance kit is required as well.

Also available is a KT91 This full Overhaul Kit contains all the internal shims and gaskets as well as an oil seal.

Oil

The KT range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a full strip and rebuild. KM and KS kits will also be required as will fresh oil. These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site. Airforce V2000-VG150 lubricant is ideal for these units. Also available are a range of Service or Maintenance Kits - KM Kits - and for separator change, the KS kits. We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.

KT006 Overhaul Kit for Hydrovane 6 or 12

KT006 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Oil

KT031 Overhaul Kit for Hydrovane 13 or 23 or 33

KT31 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 13 or 23 or 33PU or PURS or PUAS

Oil

KT032 Overhaul Kit for Hydrovane 43 or 48

KT32 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 43 or 48PU or PURS or PUAS or AC

Oil

KT066 Overhaul Kit for Hydrovane 45 or 66 or 90D Portables

KT66 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 45 or 66PU or PURS or PUAS or Portable models starting 90D or 90DSS or 90DSG

Oil

KT120 Overhaul Kit for Hydrovane 120 or 139 or 140

KT84 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 120 or 140 or 139 (used in Portables 110D and 152 D series)

Oil

KT51 Overhaul Kit for 5 or 15

KT51 is an overhaul Kit that is suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 5 and 15 PURS and PUTS

Oil

KT52 Overhaul Kit for Hydrovane 501 or 502 or V1 or V2

KT52 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for models 501 and 502 PURS and PUTS and V1 and V2

Oil

KT53 Overhaul Kit for Hydrovane 25 or 504 or V05

KT51 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 5 and 15 PURS and PUTS

Oil

KT71 Overhaul Kit for Hydrovane 37 or 47 or 705 or 707 or V05 or V07

KT71 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 37 or 47 or 705 or 707 or V05 or V07 PSAS or PUAS

Oil

KT72 Overhaul Kit for 67 or 68 or 87 or 88 or 711 or 715

KT72 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 67 and 87 or 68 and 88 or 711PUAS to s/n 001472 or 711 AirLogic to s/n 900108 or 715PUAS to s/n 000874 or 715 AirLogic prior to August 1996

Oil

KT73 Overhaul Kit for Hydrovane 711 or 715

KT73 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 711PUAS from s/n 001473 or 711 AirLogic from s/n 900109 or 715PUAS from s/n 000875 or 715 AirLogic after August 1996

Oil

KT74 Overhaul Kit for Hydrovane V11 or V15

KT74 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models V11 and V15

Oil

KT81 Overhaul Kit for Hydrovane 128 or 148

KT81 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older Mk 1 models 128 to 7HV or 148 to 5HV

Oil

KT82 Overhaul Kit for Hydrovane 128 or 148 or 818 or 822

KT82 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 128 from s/n 8HV and 148 from s/n 7HV or Models 818 and 820 AirLogic Mark 1

Oil

KT83 Overhaul Kit for Hydrovane 178

KT83 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 178 to s/n 5HV

Oil

KT84 Overhaul Kit for Hydrovane 178 or 218 or 258 or 845

KT84 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 178 from s/n 5HV up or 218 or 258 or 845 to s/n 000345

Oil

KT86 Overhaul Kit for Hydrovane 818 or 822 or V18 or V22

KT86 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 818 and 822PUAS or 818 and 822AirLogic Mk2 or V18 and V22

Oil

KT87 Overhaul Kit for Hydrovane 830 or 837 or V30 or V37 845 or V45

KT84 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 830 or 837 or V30 or V37 or 845 or V45

Oil

KT91 Overhaul Kit for Hydrovane 955 or 975

KT91 is an Overhaul Kit suitable for a full strip and rebuild of the compressor. It should be used in conjunction with the appropriate KM (Maintenance) and KS (Separator) kit.

Suitable for older models 955 and 975

Oil