Here you will find the accessories such as drains, wall mounting and joining kits for the BEA Technologies inline filters we supply.

The standard drain most commonly used is the XAD 251 float drain that is normally set to operate automatically as long as there is more than 0.6 bar in the filter – with less than 0.6 bar the unit fully opens to release any moisture trapped. This can be altered to semi-automatic so the drain does not open below 0.6 bar and to manually force a discharge.

The wall mounting and joining kits allow easy, safe and secure fitting of the filters.

Auto-drains and ‘No Air Loss’ drains can also be fitted.

We supply them all so shop our range today!

Showing all 3 results