The fixed speed Hydrovane HV04RM is a small and compact open air compressor, ideally suited for light industrial and workshop applications where the compressed air outlet needs to be situated close to the point of use. Featuring a 200L receiver mounted as standard, the HV04RM is ready to go from the moment it reaches you. The HV04RM is also available with an Aftercooler kit which alone will remove >60% of condensate, or an Aftercooler kit and Membrane Dryer fitted which will provide you with >100% oil and condensate free dry air! If required, please select from the dropdown above before purchase. Specification includes:

• 4kW motor power
• 200L receiver mounted
• 50Hz – 400V, 3 phase
• Pressure set to 10 bar providing 20.1cfm max
• Multiple drying options available:
  • Available with aftercooler kit (>60% dry air)
  • Available with aftercooler kit and membrane dryer option (>100% dry air)
• DOL (Direct On Line) Starter fitted
• Low noise, at only 73dB(A)
• 990mm (h) x 1410mm (w) x 455mm ( d)
• Air quality: < 3 mg/m3 or <1 mg/m3 with aftercooler kit and membrane dryer option
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month UK wide warranty provided

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed Hydrovane HV04E is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV04E also comes with the options to add a fully integrated 260L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 4kW motor power
• Available with integrated 260L receiver and/or refrigerant dryer options:
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• 50Hz – 400V, 3 phase
• Available as 7 bar  or 10 bar type:
  • 7 bar: 24.0cfm max
  • 10 bar: 20.1cfm max
• Low noise, at only 66dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1055mm (h) x 630 (w) x 680 (d)
  • With integrated receiver: 1165mm (h) x 1146 (w) x 685 (d)
  • With integrated refrigerant dryer: 1078mm (h) x 630 (w) x 968 (d)
  • With integrated receiver and refrigerant dryer: 1165mm (h) x 1146 (w) x 968 (d)
• Air quality: < 3 mg/m3 (standalone), < 3 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years. Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!