Our range of lower flow PRODRY models provide a proven solution for compressed air drying and are ideal for smaller point of use applications. Designed to deliver optimum performance in line with the highest standards of air purity, as specified in ISO 8573-1: 2010, PRODRY models PD004 to PD035 are supplied as standard with XA grade 0.01 micron coalescing filter. With a compact design and multi-ported manifold the dryer can be installed vertically and horizontally, providing a flexible solution to your compressed air drying needs. This highly reliable, high efficiency range of dryers features in-built energy management, allowing the purge flow to be isolated during periods of low demand for efficient use of compressed air.

• Flow rate: 25cfm / 42nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 3/8″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Includes 0.1 micron, 0.01 micron pre filters and after dryer desiccant dust removal filters
• Dimensions: 1204mm (h) x 280mm (w) x 92mm (d)
• Packed weight: 27kg

• 5.5kW 3 phase electric motor, 7.5hp
• 25.0 cfm, 0.707 m3/min 10 bar
• 18.5 cfm 0.525 m3/min 13 bar
• 10 bar/150 psig maximum pressure
• 13 bar/190 psig maximum pressure
• Extremely quiet at only 61 dB (A)
• LCD Pressure Transducer BASIC control panel with 24v control voltage as standard
• Aftercooler as standard – Discharge air is kept at only 10C or 15C above ambient, with frost protection control
• 817 (W) x 520 (D) x 495 (H) base unit, 1185 (W) x 550 (D) x 1010 (H) inc receiver, 1723 (W) x 642 (D) x 1205 (H) inc receiver and dryer
• 130kg base unit 10 bar/13 bar, 180kg inc receiver 10 bar/205kg inc receiver 13 bar, 250kg inc receiver and dryer 10 bar/300kg inc receiver and dryer 13 bar (unpacked weight)
• Delivery generally ex-stock

Available with no receiver – base unit only – C7L, a 90 Litre receiver mounted – C7LR or with a 270 Litre receiver with dryer – C7LDR (cost will change accordingly). Please pick from the above dropdown to enable purchase.

Available with the following pressure options: “10 bar” and “13 bar”. Please pick from the above dropdown to enable purchase. 

Also available with sound insulating hood for an additional cost. Please pick ‘Included’ from the above dropdown if required.

– Contact us about other C7L options including 230v single phase supply food grade oil and short run control systems –