All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 365cfm / 620nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1.1/2″
• Duplex configuration
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1962mm (h) x 520mm (w) x 328mm (d)
• Packed weight: 355kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 275cfm / 467nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1.1/2″
• Duplex configuration
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1562mm (h) x 520mm (w) x 328mm (d)
• Packed weight: 201kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 215cfm / 365nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1.1/2″
• Duplex configuration
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1362mm (h) x 520mm (w) x 328mm (d)
• Packed weight: 180kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 175cfm / 297nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1.1/4″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1962mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 130kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 135cfm / 229nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1.1/4″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1562mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 108kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 105cfm / 178nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1362mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 97kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 85cfm / 144nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 1″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 1052mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 81kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 65cfm / 110nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 3/4″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 852mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 70kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 55cfm / 93nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 3/4″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 752mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 65kg

All Pro Dry units come complete with an intelligent diagnostic system installed as standard on each model which is bespoke to Walker Filtration. They are also supplied with an integral electronic drain valve which is operated and controlled by the CPU. Ease of service has been foremost in the design. Each unit can be serviced without disturbing the surrounding pipework. Desiccant cartridges can also be changed out effectively without causing excessive down time. The compact size of the Pro Dry ensures that installation is simple and versatile. The units can be installed in small spaces in either a vertical or horizontal position.

• Flow rate: 45cfm / 76nm3/hr @ 7 bar
• Max working pressure: 16 Bar
• Pressure dew point: -40C with inlet temp of 35C
• Pipe size: 3/4″
• 2 cartridges. Removable for quick and efficient change out
• LED Controller
• Min inlet temp: 1.5C/Max inlet temp: 50C
• Supply: 12VDC – 24VDC or 100 – 240 VAC at 50 – 60Hz
• Unit not supplied with pre-filtration, X1 and XA grade recommended
• Drain adaptor kit included to allow fitting of filter (1/4″ x 4mm swivel adaptor and tubing)
• Mounting holes provided on skid base
• Dimensions: 652mm (h) x 520mm (w) x 164mm (d)
• Packed weight: 59kg