The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 12 Flow rate 1200 l/min 42 cfm @ 5C pressure dew point
• 7.5kW/10HP
• Connections: 1/2″ BSP-F
• 370mm (w) x 515mm (d) x 475mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 30kg

• 7.5kW 3 phase electric motor, 10hp
• 37.1 cfm, 1.05 m3/min 8 bar
• 36.4 cfm 1.03 m3/min 10 bar
• 8 bar/115 psig maximum pressure
• 10 bar/150 psig maximum pressure
• Extremely quiet at only 59.5 dB (A)
• LCD Pressure Transducer BASIC control panel with 24v control voltage as standard
• Aftercooler as standard – Discharge air is kept at only 10C or 15C above ambient, with frost protection control
• 1170 (W) x 600 (D) x 600 (H) base unit, 1815 (W) x 720 (D) x 1350 (H) inc receiver, 1960(W) x 720 (D) x 1350 (H) inc receiver and dryer (without sound insulating hood)
• 1500 (W) x 784 (D) x 800 (H) base unit, 1820 (W) x 835 (D) x 1495 (H) inc receiver, 2040 (W) x 835 (D) x 1500 (H) inc receiver and dryer (with sound insulating hood)
• 260kg base unit 8 bar/10 bar, 350kg inc receiver 8 bar/10 bar, 380kg inc receiver and dryer 8 bar/10 bar (unpacked weight without sound insulating hood)
• 395kg base unit 8 bar/10 bar, 515kg inc receiver 8 bar/10 bar, 550kg inc receiver and dryer 8 bar/10 bar (unpacked weight with sound insulating hood)
• Delivery generally ex-stock

Available with no receiver – base unit only – C10L, an RM 350 Litre receiver mounted – C10LR or with an RM 350 Litre receiver with dryer – C10LDR (cost will change accordingly). Please pick from the above dropdown to enable purchase.

Available with the following pressure options: “8 bar” and “10 bar”. Please pick from the above dropdown to enable purchase. 

Also available with sound insulating hood for an additional cost. Please pick ‘Included’ from the above dropdown if required.

Compared to other compressors, the BLADE’s very low rotational speed, a distinctive feature of a Mattei compressor, means more air, greater reliability, reduced energy consumption and quiet operation. This range leverages Mattei’s proprietary rotary vane technology with a dual belt transmission, housed with a sleek, powder coated cabinet. Specification includes:

• 7.5kW 10hp 3 phase motor
• 8 bar 115 psig model – 1.085 m3/min 38 cfm
• 10 bar 150 psig model – 1.025 m3/min 36 cfm
• 13 bar 175 psig model – 0.9 m3/min 32 cfm
• 64 dB(A)
• 950mm (L) x 730mm (W) x 800mm (H) (base unit)
• 1530mm (L) x 730mm (W) x 1340mm (H) (base unit plus receiver)
• 400V/50HZ/3
• 5 year unlimited hours air end warranty
• 2 year warranty on other key components
• 195kg base unit, 265kg inc receiver, 295kg inc receiver and dryer (unpacked weight)

Available with no receiver (base unit only), a 270 Litre receiver mounted – BLADE S or with a 270 Litre receiver with dryer – BLADE SE (cost will change accordingly). Please pick from the above dropdown to enable purchase.

Also available in the following models: “8 bar/115 psi”, “10 bar/145 psi” and “13 bar/189 psi” (cost will change accordingly). Please pick from the above secondary dropdown to enable purchase.