The fixed speed (FS) as standard Hydrovane HV22 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV22 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV22 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 22kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 124.5cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 127.1cfm max @ 50Hz or 114.6cfm max @ 60Hz
  • 8 bar (RS) – 113.8cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 104.5cfm max @ 50Hz or 100.0cfm max @ 60Hz
  • 10 bar (RS) – 108.3cfm max (same @ 50Hz/60Hz)
• Low noise, at only 71dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV45 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV45 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model.

• 45kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 263.7cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 258.9cfm max @ 50Hz or 231.0cfm max @ 60Hz
  • 8 bar (RS) – 243.5cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 231.0cfm max @ 50Hz or 202.3cfm max @ 60Hz
  • 10 bar (RS) – 230.0cfm max (same @ 50Hz/60Hz)
• Low noise, at only 73dB(A)
• 1640mm (h) x 900 (w) x 1130 (d)
• Air quality < 3 mg/m3
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 52 Flow rate 5200 l/min 184 cfm @ 5C pressure dew point
• 22+kW/30+HP
• Connections: 1.1/4″ BSP-F
• 345mm (w) x 445mm (d) x 740mm (h)
• Max inlet pressure 14 bar
• 230v single phase electrical supply required
• Packed weight 45kg

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 43 Flow rate 4300 l/min 152 cfm @ 5C pressure dew point
• 22kW/30HP
• Connections: 1.1/4″ BSP-F
• 345mm (w) x 445mm (d) x 740mm (h)
• Max inlet pressure 14 bar
• 230v single phase electrical supply required
• Packed weight 45kg