The fixed speed Hydrovane HV04RM is a small and compact open air compressor, ideally suited for light industrial and workshop applications where the compressed air outlet needs to be situated close to the point of use. Featuring a 200L receiver mounted as standard, the HV04RM is ready to go from the moment it reaches you. The HV04RM is also available with an Aftercooler kit which alone will remove >60% of condensate, or an Aftercooler kit and Membrane Dryer fitted which will provide you with >100% oil and condensate free dry air! If required, please select from the dropdown above before purchase. Specification includes:

• 4kW motor power
• 200L receiver mounted
• 50Hz – 400V, 3 phase
• Pressure set to 10 bar providing 20.1cfm max
• Multiple drying options available:
  • Available with aftercooler kit (>60% dry air)
  • Available with aftercooler kit and membrane dryer option (>100% dry air)
• DOL (Direct On Line) Starter fitted
• Low noise, at only 73dB(A)
• 990mm (h) x 1410mm (w) x 455mm ( d)
• Air quality: < 3 mg/m3 or <1 mg/m3 with aftercooler kit and membrane dryer option
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month UK wide warranty provided

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed Hydrovane HV04E is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV04E also comes with the options to add a fully integrated 260L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 4kW motor power
• Available with integrated 260L receiver and/or refrigerant dryer options:
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• 50Hz – 400V, 3 phase
• Available as 7 bar  or 10 bar type:
  • 7 bar: 24.0cfm max
  • 10 bar: 20.1cfm max
• Low noise, at only 66dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1055mm (h) x 630 (w) x 680 (d)
  • With integrated receiver: 1165mm (h) x 1146 (w) x 685 (d)
  • With integrated refrigerant dryer: 1078mm (h) x 630 (w) x 968 (d)
  • With integrated receiver and refrigerant dryer: 1165mm (h) x 1146 (w) x 968 (d)
• Air quality: < 3 mg/m3 (standalone), < 3 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years. Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The new S-Series of oil-free scroll compressors from Champion does not use any oil anywhere in the compressor and has been certified ISO 8573-1 Class 0 and silicone free, which represents the highest air quality level possible. The S-Series S4 compressor is also very versatile and has multiple configuration set-ups, please select from the drop-downs above to configure your S-Series compressor to your requirements (and please get in touch if you need any assistance!).

• Available as 8 or 10 bar type
• 23.6m3/h capacity @ 8 bar or 21.2m3/h capacity @ 10 bar
• 4kW electric motor
• 100% oil free
• Inbuilt automatic condensate drain
• High volume cooling fan
• Low noise sound enclosure, including internal vibration isolators
• Available in either 230v, 50/60Hz or 400v, 50/60Hz
• Available with two controller types:
  • Basic Relay Control Panel:
    • NEMA 1 UL508A Labeled Panel with operation on light
    • Magnetic Contactor with Overload Protection
    • 115V Control Circuit Transformer with Fusing
    • Emergency Stop and Reset Buttons
    • Run Time Meter and Pressure Gauge
  • Deluxe HMI Control Panel:
    • 3.5″ Full Colour Touch Screen with 26 Language Options
    • Integral Webserver via Modbus TCP Interface over Ethernet (allows visibility of the system from any computer/mobile with an internet connection)
    • PLC Controlled
    • Lead/Lag Control with Forced Alternation
    • System Capacity and Operation Trending
    • 24V / DC Power Supply with Fusing
    • System Run Time Meter
    • Alarm/Fault Log
    • System Discharge Pressure
    • Pump Discharge Temperature
    • System Maintenance Timers

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 6 Flow rate 600 l/min 21 cfm @ 5C pressure dew point
• 4kW/5.5HP
• Connections: 1/2″ BSP-F
• 370mm (w) x 515mm (d) x 475mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 27kg

• 4kW 3 phase electric motor, 5.5hp
• 18.9 cfm, 0.536 m3/min
• 10bar/150 psig maximum pressure
• Extremely quiet at only 61 dB (A)
• LCD Pressure Transducer BASIC control panel with 24v control voltage as standard
• Aftercooler as standard – Discharge air is kept at only 10C or 15C above ambient, with frost protection control
• 817 (W) x 520 (D) x 495 (H) base unit, 1185 (W) x 550 (D) x 1010 (H) inc receiver, 1723 (W) x 642 (D) x 1205 (H) inc receiver and dryer
• 125kg base unit, 175kg inc receiver, 245kg inc receiver and dryer (unpacked weight)
• Delivery generally ex-stock

Available with no receiver – base unit only – C5L, a 90 Litre receiver mounted – C5LR or with a 270 Litre receiver with dryer – C5LDR (cost will change accordingly). Please pick from the above dropdown to enable purchase.

– Contact us about other C5L options including 230v single phase supply food grade oil and short run control systems –

Compared to other compressors, the BLADE’s very low rotational speed, a distinctive feature of a Mattei compressor, means more air, greater reliability, reduced energy consumption and quiet operation. This range leverages Mattei’s proprietary rotary vane technology with a dual belt transmission, housed with a sleek, powder coated cabinet. Specification includes:

• 4kW 5.5hp motor
• 8 bar 115 psig model – 0.63 m3/min 22cfm
• 10 bar 145 psig model – 0.6 m3/min 21 cfm
• 61 dB(A)
• 950mm (L) x 730mm (W) x 800mm (H) (base unit)
• 1530mm (L) x 730mm (W) x 1340mm (H) (base unit plus receiver)
• 400V/50HZ/3
• 5 year unlimited hours air end warranty
• 2 year warranty on other key components
• 180kg base unit, 250kg inc receiver, 280kg inc receiver and dryer (unpacked weight)

Available with no receiver (base unit only), a 270 Litre receiver mounted – BLADE S or with a 270 Litre receiver with dryer – BLADE SE (cost will change accordingly). Please pick from the above dropdown to enable purchase.

Also available in the following models: “8 bar/115 psi” and “10 bar/145 psi” (cost will change accordingly). Please pick from the above secondary dropdown to enable purchase.