The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 18 Flow rate 1800 l/min 64 cfm @ 5C pressure dew point
• 11kW/15HP
• Connections: 1/2″ BSP-F
• 370mm (w) x 515mm (d) x 475mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 34kg

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 12 Flow rate 1200 l/min 42 cfm @ 5C pressure dew point
• 7.5kW/10HP
• Connections: 1/2″ BSP-F
• 370mm (w) x 515mm (d) x 475mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 30kg

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 9 Flow rate 950 l/min 34 cfm @ 5C pressure dew point
• 5.5kW/7.5HP
• Connections: 1/2″ BSP-F
• 370mm (w) x 515mm (d) x 475mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 28kg

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 6 Flow rate 600 l/min 21 cfm @ 5C pressure dew point
• 4kW/5.5HP
• Connections: 1/2″ BSP-F
• 370mm (w) x 515mm (d) x 475mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 27kg

The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection. AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

• AMD 3 Flow rate 350 l/min 12 cfm @ 5C pressure dew point
• 3kW/4HP
• Connections: 3/8″ BSP-F
• 305mm (w) x 345mm (d) x 435mm (h)
• Max inlet pressure 16 bar
• 230v single phase electrical supply required
• Packed weight 23kg