The fixed speed (FS) as standard Hydrovane HV11 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV11 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV11 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 11kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 61.6cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 57.6cfm max @ 50Hz or 52.4cfm max @ 60Hz
  • 8 bar (RS) – 55.0cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 49.8cfm max @ 50Hz or 45.6cfm max @ 60Hz
  • 10 bar (RS) – 48.5cfm max (same @ 50Hz/60Hz)
• Low noise, at only 69dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV15 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV15 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV15 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 15kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 80.8cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 78.1cfm max @ 50Hz or 67.1cfm max @ 60Hz
  • 8 bar (RS) – 71.6cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 71.0cfm max @ 50Hz or 58.4cfm max @ 60Hz
  • 10 bar (RS) – 60.7cfm max (same @ 50Hz/60Hz)
• Low noise, at only 70dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV18 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV18 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV18 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 18kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 104.6cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 101.7cfm max @ 50Hz or 99.0cfm max @ 60Hz
  • 8 bar (RS) – 96.9cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 90.1cfm max @ 50Hz or 86.2cfm max @ 60Hz
  • 10 bar (RS) – 88.5cfm max (same @ 50Hz/60Hz)
• Low noise, at only 70dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV22 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV22 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV22 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 22kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 124.5cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 127.1cfm max @ 50Hz or 114.6cfm max @ 60Hz
  • 8 bar (RS) – 113.8cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 104.5cfm max @ 50Hz or 100.0cfm max @ 60Hz
  • 10 bar (RS) – 108.3cfm max (same @ 50Hz/60Hz)
• Low noise, at only 71dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV45 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV45 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model.

• 45kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 263.7cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 258.9cfm max @ 50Hz or 231.0cfm max @ 60Hz
  • 8 bar (RS) – 243.5cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 231.0cfm max @ 50Hz or 202.3cfm max @ 60Hz
  • 10 bar (RS) – 230.0cfm max (same @ 50Hz/60Hz)
• Low noise, at only 73dB(A)
• 1640mm (h) x 900 (w) x 1130 (d)
• Air quality < 3 mg/m3
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV37 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV37 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model.

• 37kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 217.8cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 210.1cfm max @ 50Hz or 193.7cfm max @ 60Hz
  • 8 bar (RS) – 202.1cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 179.0cfm max @ 50Hz or 168.5cfm max @ 60Hz
  • 10 bar (RS) – 186.1cfm max (same @ 50Hz/60Hz)
• Low noise, at only 73dB(A)
• 1640mm (h) x 900 (w) x 1130 (d)
• Air quality < 3 mg/m3
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV30 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV30 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model.

• 30kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 189.9cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 176.6cfm max @ 50Hz or 156.5cfm max @ 60Hz
  • 8 bar (RS) – 171.9cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 156.5cfm max @ 50Hz or 136.2cfm max @ 60Hz
  • 10 bar (RS) – 159.3cfm max (same @ 50Hz/60Hz)
• Low noise, at only 73dB(A)
• 1640mm (h) x 900 (w) x 1130 (d)
• Air quality < 3 mg/m3
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The new S-Series of oil-free scroll compressors from Champion does not use any oil anywhere in the compressor and has been certified ISO 8573-1 Class 0 and silicone free, which represents the highest air quality level possible. The S-Series Duplex 15D compressor comes complete with the brilliant Deluxe HMI control panel as standard and with the option to add Soft Start operation, this reduces energy consumption as the compressor runs only when needed. Please pick from the dropdown above to add if required.

• Available as 8 or 10 bar type
• 106.0m3/h capacity @ 8 bar or 82.6m3/h capacity @ 10 bar
• 15kW electric motor
• 100% oil free
• Inbuilt automatic condensate drain
• High volume cooling fan
• Low noise sound enclosure, including internal vibration isolators
• 400v, 50/60Hz
• Available with Standard or Soft Start operation (Soft Start reduces energy consumption as the compressor runs only when needed)
• Equipped with the Deluxe HMI Control Panel:
  • 3.5″ Full Colour Touch Screen with 26 Language Options
  • Integral Webserver via Modbus TCP Interface over Ethernet (allows visibility of the system from any computer/mobile with an internet connection)
  • PLC Controlled
  • Lead/Lag Control with Forced Alternation
  • System Capacity and Operation Trending
  • 24V / DC Power Supply with Fusing
  • System Run Time Meter
  • Alarm/Fault Log
  • System Discharge Pressure
  • Pump Discharge Temperature
  • System Maintenance Timers

The new S-Series of oil-free scroll compressors from Champion does not use any oil anywhere in the compressor and has been certified ISO 8573-1 Class 0 and silicone free, which represents the highest air quality level possible. The S-Series Duplex 11D compressor comes complete with the brilliant Deluxe HMI control panel as standard and with the option to add Soft Start operation, this reduces energy consumption as the compressor runs only when needed. Please pick from the dropdown above to add if required.

• Available as 8 or 10 bar type
• 69.0m3/h capacity @ 8 bar or 52.0m3/h capacity @ 10 bar
• 11kW electric motor
• 100% oil free
• Inbuilt automatic condensate drain
• High volume cooling fan
• Low noise sound enclosure, including internal vibration isolators
• 400v, 50/60Hz
• Available with Standard or Soft Start operation (Soft Start reduces energy consumption as the compressor runs only when needed)
• Equipped with the Deluxe HMI Control Panel:
  • 3.5″ Full Colour Touch Screen with 26 Language Options
  • Integral Webserver via Modbus TCP Interface over Ethernet (allows visibility of the system from any computer/mobile with an internet connection)
  • PLC Controlled
  • Lead/Lag Control with Forced Alternation
  • System Capacity and Operation Trending
  • 24V / DC Power Supply with Fusing
  • System Run Time Meter
  • Alarm/Fault Log
  • System Discharge Pressure
  • Pump Discharge Temperature
  • System Maintenance Timers

The new S-Series of oil-free scroll compressors from Champion does not use any oil anywhere in the compressor and has been certified ISO 8573-1 Class 0 and silicone free, which represents the highest air quality level possible. The S-Series S7D Duplex compressor comes complete with the brilliant Deluxe HMI control panel as standard.

• Available as 8 or 10 bar type
• 47.2m3/h capacity @ 8 bar or 42.5m3/h capacity @ 10 bar
• 7kW electric motor
• 100% oil free
• Inbuilt automatic condensate drain
• High volume cooling fan
• Low noise sound enclosure, including internal vibration isolators
• 400v, 50/60Hz
• Equipped with the Deluxe HMI Control Panel:
  • 3.5″ Full Colour Touch Screen with 26 Language Options
  • Integral Webserver via Modbus TCP Interface over Ethernet (allows visibility of the system from any computer/mobile with an internet connection)
  • PLC Controlled
  • Lead/Lag Control with Forced Alternation
  • System Capacity and Operation Trending
  • 24V / DC Power Supply with Fusing
  • System Run Time Meter
  • Alarm/Fault Log
  • System Discharge Pressure
  • Pump Discharge Temperature
  • System Maintenance Timers