The fixed speed Hydrovane HV02 Tripod is a small and compact open air compressor, ideally suited for light industrial and workshop applications where the compressed air outlet needs to be situated close to the point of use. The HV02 Tripod is available with multiple electrical configurations, making it a versatile piece of equipment. . The HV02 Tripod is also available with an Aftercooler kit which alone will remove >60% of condensate, or an Aftercooler kit and free standing Refrigerant Dryer with oil removal filter which will provide you with >100% oil and condensate free dry air! If required, please select from the dropdown above before purchase. Specification includes:

• 2.2kW motor power
• Available as 50Hz –  240V, 1 phase or 400V, 3 phase
• Pressure set to 10 bar providing 8.0cfm max
• Multiple drying options available:
  • Available with Aftercooler kit (>60% dry air)
  • Available with Aftercooler kit and free standing Refrigerant Dryer option (>100% dry air)
• DOL (Direct On Line) Starter fitted
• Low noise, at only 69dB(A)
• 470mm (h) x 700mm (w) x 270mm ( d)
• Air quality: < 3 mg/m3 or < 1mg/m3 with Aftercooler and free standing Refrigerant Dryer option
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month UK wide warranty provided

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed Hydrovane HV04E is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV04E also comes with the options to add a fully integrated 260L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 4kW motor power
• Available with integrated 260L receiver and/or refrigerant dryer options:
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• 50Hz – 400V, 3 phase
• Available as 7 bar  or 10 bar type:
  • 7 bar: 24.0cfm max
  • 10 bar: 20.1cfm max
• Low noise, at only 66dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1055mm (h) x 630 (w) x 680 (d)
  • With integrated receiver: 1165mm (h) x 1146 (w) x 685 (d)
  • With integrated refrigerant dryer: 1078mm (h) x 630 (w) x 968 (d)
  • With integrated receiver and refrigerant dryer: 1165mm (h) x 1146 (w) x 968 (d)
• Air quality: < 3 mg/m3 (standalone), < 3 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years. Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed Hydrovane HV05E is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV05E also comes with the options to add a fully integrated 260L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 5.5kW motor power
• Available with integrated 260L receiver and/or refrigerant dryer options:
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• 50Hz – 400V, 3 phase
• Available as 7 bar  or 10 bar type:
  • 7 bar: 32.1cfm max
  • 10 bar: 25.1cfm max
• Low noise, at only 66dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1055mm (h) x 630 (w) x 680 (d)
  • With integrated receiver: 1165mm (h) x 1146 (w) x 685 (d)
  • With integrated refrigerant dryer: 1078mm (h) x 630 (w) x 968 (d)
  • With integrated receiver and refrigerant dryer: 1165mm (h) x 1146 (w) x 968 (d)
• Air quality: < 3 mg/m3 (standalone), < 3 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years. Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV07E is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV07E is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV07E also comes with the options to add a fully integrated 260L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 7.5kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 260L receiver and/or refrigerant dryer options:
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• 50Hz – 400V, 3 phase
• Available as 7 bar (FS only) or 10 bar type:
  • 7 bar (FS): 44.1cfm max
  • 10 bar (FS): 35.0cfm max
  • 10 bar (RS): 34.3cfm max
• Low noise, at only 67dB(A) (FS), or 70dB(A) (RS)
• Sized as follows, dependant on specification:
  • Standalone unit: 1055mm (h) x 630 (w) x 680 (d)
  • With integrated receiver: 1165mm (h) x 1146 (w) x 685 (d)
  • With integrated refrigerant dryer: 1078mm (h) x 630 (w) x 968 (d)
  • With integrated receiver and refrigerant dryer: 1165mm (h) x 1146 (w) x 968 (d)
• Air quality: < 3 mg/m3 (standalone), < 3 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV11 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV11 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV11 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 11kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 61.6cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 57.6cfm max @ 50Hz or 52.4cfm max @ 60Hz
  • 8 bar (RS) – 55.0cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 49.8cfm max @ 50Hz or 45.6cfm max @ 60Hz
  • 10 bar (RS) – 48.5cfm max (same @ 50Hz/60Hz)
• Low noise, at only 69dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV15 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV15 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV15 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 15kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 80.8cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 78.1cfm max @ 50Hz or 67.1cfm max @ 60Hz
  • 8 bar (RS) – 71.6cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 71.0cfm max @ 50Hz or 58.4cfm max @ 60Hz
  • 10 bar (RS) – 60.7cfm max (same @ 50Hz/60Hz)
• Low noise, at only 70dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV18 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV18 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV18 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 18kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 104.6cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 101.7cfm max @ 50Hz or 99.0cfm max @ 60Hz
  • 8 bar (RS) – 96.9cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 90.1cfm max @ 50Hz or 86.2cfm max @ 60Hz
  • 10 bar (RS) – 88.5cfm max (same @ 50Hz/60Hz)
• Low noise, at only 70dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

The fixed speed (FS) as standard Hydrovane HV22 is enclosed for quiet operation, and with a small footprint and low noise levels these compressors can be conveniently located at the point of use. With Hydrovane, installation is hassle-free. All enclosed units fit through a standard 36” (914mm) door providing the most versatile compressor range in the market. The Hydrovane HV22 is now available with the Regulated Speed (RS) option, which precisely matches the compressor speed to the compressor output. The direct drive low RPM ensures a reliable pulse free supply of good quality, quietly produced compressed air. If used correctly the Regulated Speed (RS) machines can deliver benefits of up to 50% in energy savings compared to the equivalent standard fixed speed model. The Hydrovane HV22 also comes with the options to add a fully integrated 272L receiver or a refrigerant dryer (Hypac package), or both (Air Solution package) to your compressor to offer you the best solution for your compressed air requirements.

• 22kW motor power
• Available as either standard Fixed Speed (FS) or with Regulated Speed (RS) option
• Available with integrated 272L receiver and/or refrigerant dryer options (50Hz only):
  • Pressure dew point with receiver only: 8C
  • Pressure dew point with refrigerant dryer only: 3C
  • Pressure dew point with receiver and refrigerant dryer: 3C
• Available as 50Hz or 60Hz type:
  • 50Hz – 400V, 3 phase
  • 60Hz – 460V, 3 phase (standalone only)
• Available as 6 bar (RS only), 8 bar or 10 bar type:
  • 6 bar (RS) – 124.5cfm max (same @ 50Hz/60Hz)
  • 8 bar (FS) – 127.1cfm max @ 50Hz or 114.6cfm max @ 60Hz
  • 8 bar (RS) – 113.8cfm max (same @ 50Hz/60Hz)
  • 10 bar (FS) – 104.5cfm max @ 50Hz or 100.0cfm max @ 60Hz
  • 10 bar (RS) – 108.3cfm max (same @ 50Hz/60Hz)
• Low noise, at only 71dB(A)
• Sized as follows, dependant on specification:
  • Standalone unit: 1550mm (h) x 700 (w) x 850 (d)
  • With integrated receiver: 1550mm (h) x 1355 (w) x 1187 (d)
  • With integrated refrigerant dryer: 1550mm (h) x 1215 (w) x 825 (d)
  • With integrated receiver and refrigerant dryer: 1550mm (h) x 1355 (w) x 1187 (d)
• Air quality: < 3 mg/m3 (standalone), < 2 mg/m3 (with receiver only), < 1 mg/m3 (with refrigerant dryer or receiver and refrigerant dryer)
• Clean, dry and pulse free straight from the outlet means less downstream equipment required
• No gears, no belts. Up to 100,000+ operating hours due to its simple integral design
• 12 month warranty extendable to 10 years (5 years on the Regulated Speed inverter). Conditional to the unit being sited, operated and maintained correctly by a Hydrovane approved distributor (Airware International is an approved distributor! Get in touch with us today to find out more)
• Fitted with REVS (Reduced Energy Venting System) as standard

Download and view the official Hydrovane brochure under the “Documentation” tab above!

• 15kW 3 phase electric motor, 20hp
• 79.5 cfm, 2.25 m3/min 8 bar
• 78.4 cfm, 2.22 m3/min 10 bar
• 8 bar/115 psig maximum pressure
• 10 bar/150 psig maximum pressure
• Extremely quiet at only 59.5 dB (A)
• LCD Pressure Transducer BASIC control panel with 24v control voltage as standard
• Aftercooler as standard – Discharge air is kept at only 10C or 15C above ambient, with frost protection control
• 1335 (W) x 693 (D) x 610 (H) base unit, 1815 (W) x 720 (D) x 1365 (H) inc receiver, 1960(W) x 720 (D) x 1365 (H) inc receiver and dryer (without sound insulating hood)
• 1500 (W) x 784 (D) x 800 (H) base unit, 1820 (W) x 835 (D) x 1495 (H) inc receiver, 2040 (W) x 835 (D) x 1500 (H) inc receiver and dryer (with sound insulating hood)
• 300kg base unit 8 bar/10 bar, 380kg inc receiver 8 bar/10 bar, 470kg inc receiver and dryer 8 bar/10 bar (unpacked weight without sound insulating hood)
• 435kg base unit 8 bar/10 bar, 575kg inc receiver 8 bar/10 bar, 610kg inc receiver and dryer 8 bar/10 bar (unpacked weight with sound insulating hood)
• Delivery generally ex-stock

Available with no receiver – base unit only – C20L, an RM 350 Litre receiver mounted – C20LR or with an RM 350 Litre receiver with dryer – C20LDR (cost will change accordingly). Please pick from the above dropdown to enable purchase.

Available with the following pressure options: “8 bar” and “10 bar”. Please pick from the above dropdown to enable purchase. 

Also available with sound insulating hood for an additional cost. Please pick ‘Included’ from the above dropdown if required.

• 11kW 3 phase electric motor, 15hp
• 63.9 cfm, 1.81 m3/min 8 bar
• 61.4 cfm 1.74 m3/min 10 bar
• 8 bar/115 psig maximum pressure
• 10 bar/150 psig maximum pressure
• Extremely quiet at only 59.5 dB (A)
• LCD Pressure Transducer BASIC control panel with 24v control voltage as standard
• Aftercooler as standard – Discharge air is kept at only 10C or 15C above ambient, with frost protection control
• 1335 (W) x 693 (D) x 610 (H) base unit, 1815 (W) x 720 (D) x 1365 (H) inc receiver, 1960(W) x 720 (D) x 1365 (H) inc receiver and dryer (without sound insulating hood)
• 1500 (W) x 784 (D) x 800 (H) base unit, 1820 (W) x 835 (D) x 1495 (H) inc receiver, 2040 (W) x 835 (D) x 1500 (H) inc receiver and dryer (with sound insulating hood)
• 290kg base unit 8 bar/10 bar, 380kg inc receiver 8 bar/10 bar, 410kg inc receiver and dryer 8 bar/10 bar (unpacked weight without sound insulating hood)
• 425kg base unit 8 bar/10 bar, 555kg inc receiver 8 bar/10 bar, 590kg inc receiver and dryer 8 bar/10 bar (unpacked weight with sound insulating hood)
• Delivery generally ex-stock

Available with no receiver – base unit only – C15L, an RM 350 Litre receiver mounted – C15LR or with an RM 350 Litre receiver with dryer – C15LDR (cost will change accordingly). Please pick from the above dropdown to enable purchase.

Available with the following pressure options: “8 bar” and “10 bar”. Please pick from the above dropdown to enable purchase. 

Also available with sound insulating hood for an additional cost. Please pick ‘Included’ from the above dropdown if required.